Clean Inflow Ensures a Sparkling Pond

When operating properly, a pond will have good water volume and adequate exchange, or overflow, to ensure against stagnation. When the inflow goes awry, a pond will have either too much water or too little, and become dark.  Suddenly you find yourself constantly cleaning a muddy yard and the pond smells.

 

The most common problem with water inflow is lack of sufficient water to sustain pond level. Sometimes, heat or drought causes this problem. Most of the time though it is because the pond was not built so that it was level in the first place. Leaking can also be caused by cracks in the outdoor ponds concrete walls and plastic liners.

 

Since it’s easier to add water than to unearth, resituate and then repair a leaky basin, finding a solution for a pond that seems to have low water level usually begins with looking for a way to supply a supplementary water source. Even if the pond does leak, a fresh source of water may help the pond look cleaner.

 

However, before you consider adding a supplementary water source your best course of action is to make sure that your existing inflow pipes are not just clogged or cut off.  They get clogged with silt or debris.  Evidence that this is the culprit is soaked water or a wet patch around the surface edges of the ground.

 

Your inflow pipes can also crack or burst if they freeze during the winter. A pipe buried below frost line will run in cold weather, as long as the pickup source doesn’t dry up or freeze.  This is why most landscape architecture technologists recommend using PVC pipe. It does not tend to expand or contract like copper piping or crack like certain types of plastic pipes.

 

You can save yourself a lot of maintenance in general by making sure that your inflow pipes have a direct path to the pond. The less elbows, twists and dips that the water has to flow through, the less likely it is to become clogged.

 

If the problem is silt, you might try building a small silt basin (dug into the pool) just upstream of the pond to catch silt before it reaches the pond. This pocket can be cleaned out as needed, by hand or machine, without disturbing the pond.

 

If no supplementary stream or well is available, pond owners sometimes cut drainage ditches in the watershed above the pond. The ditches are usually filled with stone over perforated plastic pipe.

 

If your pond is located in a wet damp hollow you may have not choice to relocate it. You also may have built your pond just below some kind of watershed, which also might be cascading toxins from the earth into your pond as well. This can definitely result in the loss of your precious koi. Depending how much of the flooding in your pond s caused by seepage beneath the your only choice in this situation might be to relocate the pond!

Aerated Ponds Look Pristine

Aeration simply means adding oxygen to the water by keeping it moving and free flowing through your pond’s circulatory system. This is vital for the health of our koi and also just a great way to keep your pond looking great.

 

Koi ponds and plants (including all forms of algae), organic life and of course the koi fish themselves consume oxygen. Koi are rather special in that they need a considerable supply of oxygen in the water for their survival and well-being. The more algae and bacteria that are in the water the less oxygen there is for fish.

 

There are lots of things in your pond that are competing with your fish for oxygen. Plant life consumes oxygen during the night and gives off carbon dioxide. This process is reversed during the day. The more organic stuff that is in the pond (fish, plants, decaying material) the higher the oxygen demand of the entire ecosystem. Decaying organic matter also uses oxygen as it is converted into waste and the ‘dirtier’ the pond. This means the more trees your pond is situated under, the higher the requirement for oxygen.  The warmer the weather is the less oxygen there is in your pond.

 

Waterfalls, and air pumps can supply oxygen. Waterfalls are extremely efficient when it comes to providing good aeration but many ponds just don’t have them. Many people turn these water features off at night, which during a summer night is just when the koi need to be aerated the most.

 

There are several ways to aerate your pond but the most common ways are to install a water pump with an airstone, a commercial aerator such as a bead stone pump or a waterfall.

 

Airstones are ceramic, synthetic or natural stones through which air is blown by an air pump. These stones are characterized by hundreds of tiny holes, which create bubbles in your pond system. This allows more oxygen to circulate through your pond’s ecosystem.

 

You can also buy Plexiglas tubes that sit on the bottom of the pond and funnel oxygenated bubbles up towards the ponds surface. These commercial aerators are offered in both battery operated and outlet operated versions.

 

An external pond filter or waterfall tank can be positioned against the shallow edge of the pool to create a waterfalls.  Just make sure that the waterflow flows to just a trickle as too much water hurts the koi.